层间接触与弹性模量对某导弹场坪动载的影响

为了研究某型导弹典型公路发射场坪沉降量和受力状态,利用混凝土塑性损伤模型建立某导弹无依托发射场坪有限元模型,在选取30种典型路面结构的基础上,分析了土基层弹性模量和面层与基层间黏结状况两个因素对路面动载响应的影响。结果表明:层间接触不良会导致路面弯沉、剪应力变大。同时得出该型导弹发射道路土基层弹性模量应大于20 MPa。研究结果对于评估导弹无依托发射生存能力和快速反应能力提供参考依据。     

Spatial pricing and product allocation in online retailing

Spatial pricing means a retailer price discriminates its customers based on their geographic locations. In this article, we study how an online retailer should jointly allocate multiple products and facilitate spatial price discrimination to maximize profits. When deciding between a centralized product allocation ((i.e., different products are allocated to the same fulfillment center) and decentralized product allocation (ie, different products are allocated to different fulfillment centers), the retailer faces the tradeoff between shipment pooling (ie, shipping multiple products in one package), and demand localization (ie, stocking products to satisfy local demand) based on its understanding of customers' product valuations. In our basic model, we consider two widely used spatial pricing policies: free on board (FOB) pricing that charges each customer the exact amount of shipping cost, and uniform delivered (UD) pricing that provides free shipping. We propose a stylized model and find that centralized product allocation is preferred when demand localization effect is relatively low or shipment pooling benefit is relatively high under both spatial pricing policies. Moreover, centralized product allocation is more preferred under the FOB pricing which encourages the purchase of virtual bundles of multiple products. Furthermore, we respectively extend the UD and FOB pricing policies to flat rate shipping (ie, the firm charges a constant shipping fee for each purchase), and linear rate shipping (ie, the firm sets the shipping fee as a fixed proportion of firm's actual fulfillment costs). While similar observations from the basic model still hold, we find the firm can improve its profit by sharing the fulfillment cost with its customers via the flat rate or linear rate shipping fee structure.     

内压作用下复合材料修复裂纹管道的失效分析

为准确评估在内压作用下纤维复合材料修复含裂纹管道的有效性及失效压力,建立复合材料修复后裂纹管道的失效数值模型。该数值模型通过扩展有限元法模拟管道裂纹的扩展,利用cohesive单元模拟胶层的脱粘失效,复合材料的失效通过最大应力失效准则进行判定。通过静水压爆裂试验对所提失效数值模型进行验证,实验结果与数值计算结果具有较好的一致性。失效数值分析结果表明:当内压增大至一定值后,未修复管道的初始裂纹沿轴向及壁厚方向逐渐扩展,进而使得管道内壁单元扩展成真实裂纹,此时真实裂纹贯穿整个壁厚方向,即认为裂纹管道发生爆裂失效,爆裂失效压力随初始裂纹半长呈指数形式下降。复合材料修复裂纹管道的不同修复工况呈现相同的失效模式:在单调递增的内压作用下,管道内表面首先出现黏结裂纹,而后其外表面裂纹张开趋势急剧上升,使得复合材料层应力急剧上升,达到极限强度而失效。且对于不同的初始裂纹尺寸,存在对应的复合材料缠绕层数临界值。     

Delivery‐date and capacity management in a decentralized internal market

We study competitive due‐date and capacity management between the marketing and engineering divisions within an engineer‐to‐order (ETO) firm. Marketing interacts directly with the customers and quotes due‐dates for their orders. Engineering is primarily concerned with the efficient utilization of resources and is willing to increase capacity if the cost is compensated. The two divisions share the responsibility for timely delivery of the jobs. We model the interaction between marketing and engineering as a Nash game and investigate the effect of internal competition on the equilibrium decisions. We observe that the internal competition not only degrades the firm's overall profitability but also the serviceability. Finally, we extend our analysis to multiple‐job settings that consider both flexible and inflexible capacity. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

显示界面复杂目标辨认研究

为了使作战人员更快速地辨认武器系统显示界面目标,研究人对不同复杂程度及大小的目标符号辨认情况,为武器系统显示界面的目标编码设计提供依据。提出目标符号复杂度的定义,建立复杂度计算公式,对符号的复杂程度进行量化。通过测定被试完成搜寻特定目标的时间,建立反应时间和符号复杂度与大小、高复杂度目标数量与大小的线性回归模型。提取被试辨认不同复杂度目标的脑电信号,分析脑负荷。结果表明符号复杂度越低或尺寸越大,目标越容易辨认;当大小一定时,人对复杂度3以下的目标辨认情况较好,对复杂度3以上的目标辨认绩效明显下降;脑负荷随着目标复杂度的增大而增大。结论为武器系统显示界面的符号复杂度应设计在3以下,高复杂度目标符号使用时应合理调整其大小。     

机动管线水顶油排空油水混合物切割工艺研究

排空是机动管线的一项经常性作业。在水顶油排空过程中,不可避免地会产生混油,因此混油的切割工艺尤为关键。通过对机动管线水顶油排空作业终端混油切割流程、设备操作的分析,提出了采用1个三通球阀代替2个闸阀的切割流程,自行搭建了实验平台,测量了三通球阀的流动特性,论证了三通球阀作为机动管线混油切割阀的可行性。实验表明,新流程的使用降低了切割操作难度,提高了切割作业的快速性和准确性。     

Joint pricing,assortment, and inventory decisions for a retailer's product line

Consider a set of product variants that are differentiated by some secondary attributes such as flavor, color, or size. The retailer's problem is to jointly determine the set of variants to include in her product line (“assortment”), together with their prices and inventory levels, so as to maximize her expected profit. We model the consumer choice process using a multinomial logit choice model and consider a newsvendor type inventory setting. We derive the structure of the optimal assortment for some important special cases, including the case of horizontally differentiated items, and propose a dominance relationship for the general case that simplifies the search for an optimal assortment. We also discuss structural properties of the optimal prices. Finally, motivated by our analytical results, we propose a heuristic solution procedure, which is shown to be quite effective through a numerical study. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

对接厚板表面裂纹的残余应力强度因子

利用线弹簧模型求解对接厚板表面裂纹的残余应力强度因子。基于Reissner板理论和连续分布位错思想,将对接厚板表面裂纹问题归结为一组Cauchy型奇异积分方程,并采用Gauss-Chebyshev方法给出了奇异积分方程的数值结果,并与有限元解进行比较,计算结果表明:用线弹簧模型解决含残余应力表面裂纹问题不仅是合理可行的,而且是一种简单方便的方法,便于工程实际应用。     

基于低周疲劳理论的身管横向裂纹萌生研究

基于非线性有限元理论建立弹带挤进的动力学模型,依据低周疲劳理论对身管内壁横向裂纹的萌生时机进行研究.在仅考虑热载荷的作用下,研究热疲劳因素对身管裂纹萌生的影响;再利用热力耦合分析方法,研究将弹带的挤压和摩擦作用考虑进来后身管横向裂纹的萌生时机.结果表明,通过热力耦合模型得到的疲劳射弹发数与实弹射击实验发现的横向裂纹的萌生时机相吻合,验证了在考虑热力耦合作用下所建模型的正确性.     

预制缺陷柱壳结构的等效裂纹分析方法

针对传统有限元法在分析预制缺陷柱壳时出现的应力/应变计算精度不足、无法有效指导工程实践的问题,提出了一种具有高冗余度的等效裂纹分析方法。将预制缺陷视作典型裂纹,基于奇异裂纹元法对其进行裂纹稳定性分析,并根据稳定性分析结果来评估预制缺陷柱壳的结构完整性。通过该方法得到的分析结果具有比常规有限元分析更高的可靠性,对于导弹线式爆炸分离装置等工作环境恶劣、风险系数较高的预制缺陷柱壳结构而言,该方法有助于提升其设计的安全裕度,具有一定的工程实用性。